HP 3000 Enterprise Virtual Array - Manual (Page 90)

2. Configure the VMKernel TCP/IP networking stack for iSCSI support. Configure the VMkernel,
service console with dedicated virtual switch with a dedicated NIC for iSCSI data traffic. Follow
the instructions from VMware.
Figure 38 shows an example of a configuration.
Figure 38 Configuration tab
. 3. Open a firewall port by enabling the iSCSI software client service.
a. Using VMware’s VI client, select the server.
b. Click the Configuration tab, and then click Security Profile.
c. Select the check box for iSCSI service to enable iSCSI traffic.
d. Click OK ( Figure 39 ).
Figure 39 Security profile information
.
Setting up the iSCSI Initiator and storage 90