HP 3000 Enterprise Virtual Array - Manual (Page 104)

Figure 51 MPIO Properties page
.
Installing the MPIO feature for Windows Server 2003
For Windows Server 2003, if you are installing the initiator for the first time, check all the installation
option checkboxes and then click Next to continue (
Figure 52 ).
To add or remove specific MS iSCSI software Initiator components after the initial install, run the setup
package executable and select the check box to add MPIO. The application automatically checks the
boxes for components that are already installed. For example, if you want to add the MS MPIO
component, leave the other check boxes unchecked; check only the MS MPIO check box.
NOTE:
The installation requires a reboot.
IMPORTANT:
Windows XP Professional is not supported by Microsoft's MPIO.
Setting up the iSCSI Initiator for multipathing 104