Viewing and changing multipathing, Viewing raw mapped luns properties, 115 viewing raw mapped luns properties – HP 3000 Enterprise Virtual Array User Manual
Page 115
•
Most Recently Used—ESX server uses the most recent path to the disk until this path becomes un-
available. Even if the path becomes available, the host does not automatically revert back to the
preferred path.
•
Round Robin (Experimental)—The ESX Server load balances across all available paths. VMware
defines the Round Robin policy as Experimental; Round Robin, therefore, is not a supported mul-
tipathing policy.
NOTE:
HP recommends using Fixed (default) for EVA iSCSI connectivity.
Viewing and changing multipathing
To view and/or change datastore volume properties:
1.
From the VMware VI client, select the server, and then click the Configuration tab.
2.
Under Hardware, click Storage (SCSI, SAN and NFS) , and then select Datastore Volume.
3.
Click the Properties link to access the Volume Properties dialog box.
4.
Click Manage Path and then click OK to view and modify the virtual Machine properties.
Viewing raw mapped LUNs properties
To view raw mapped LUNs properties:
1.
From the VMware VI client, select the Virtual Machine from the inventory panel.
2.
From the Summary tab, click the Edit Settings link.
3.
On the Hardware tab, select the hard disk whose properties you want to remap.
EVA iSCSI Connectivity User Guide
115