HP 3000 Enterprise Virtual Array - Manual (Page 118)

2. Create a Solaris iSCSI host entry to present LUNs to an iSCSI host using HP Command View
EVA. Follow the procedure
Creating an iSCSI initiator host via HP Command View EVA , page 128.
(Note that the host mode setting for Solaris is Linux/MAC.
3. Enable the SendTargetsdiscovery method:
# iscsiadm modify discovery --sendtargets enable
4. Create the iSCSI device links for the local system:
# devfsadm -i iscsi
Verifying configuration settings
To verify the configuration settings, display the LUNs configured to each path by executing iscsiadm
list target -S
:
NOTE:
The following example shows four paths (ports) visible from the array on the host and two LUNs
configured on the array for the host.
For example:
# iscsiadm list target –S
Target: iqn.1986-03.com.hp:fcgw.mpx100:mpx100-66.0.
50001fe150002f70.50001fe150002f78
Alias: QlgcIsciTgtNode
TPGT: 0
ISID: 4000002a0000
Connections: 1
LUN: 3
Vendor: HP
Product: HSV210
OS Device Name: /dev/rdsk/
c4t600508B400107271000060000C540000d0s2
LUN: 4
Vendor: HP
Product: HSV210
OS Device Name: / dev/rdsk/
c4t600508B400107271000060000C540000d0s2
Target: iqn.1986-03.com.hp:fcgw.mpx100:mpx100-66.0.
50001fe150002f70.50001fe150002f7a
Alias: QlgcIsciTgtNode
TPGT: 0
ISID: 4000002a0000
Connections: 1
LUN: 3
Vendor: HP
Product: HSV210
OS Device Name: /dev/rdsk/
c4t600508B400107271000060000C540000d0s2
Setting up the iSCSI Initiator for multipathing 118