HP 3000 Enterprise Virtual Array - Manual (Page 129)

4. In the Operating system field, select the appropriate operating system for the iSCSI Initiator, as
follows:
Operating system setting with Command View 8.0 Supported iSCSI Initiator
Windows Windows
Linux/Mac OS Red Hat or SUSE Linux
Linux/Mac OS Macintosh
VMware VMware
Solaris Solaris
OpenVMS OpenVMS
5. Click Add Host to save the changes.
Figure 68 Add a host for Command View EVA
.
Presenting a virtual disk to an iSCSI Initiator via HP Command
View EVA
To present a virtual disk to an iSCSI Initiator:
1. Under the Virtual Disks folder select the appropriate Vdisk name.
2. Click the Presentation tab in the VDisk Properties screen.
3. Click the Present tab.
HP Command View lists all host entries for both Fibre Channel hosts and iSCSI hosts.
4. Select the appropriate iSCSI host entry and click Present Vdisk.
Unpresenting a virtual disk to an iSCSI Initiator using HP
Command View EVA
To unpresent a virtual disk to an iSCSI Initiator:
1. Under the Virtual Disks folder select the appropriate Vdisk name.
EVA iSCSI Connectivity User Guide 129