HP 3000 Enterprise Virtual Array - Manual (Page 132)

• HP NC373i PCI Express Multifunction Gigabit Server Adapter
• HP NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter for c-Class BladeSystem
• HP NC374m PCI Express Dual Port Multifunction Gigabit Server Adapter
• HP NC380T PCI Express Dual Port Multifunction Gigabit Server Adapter
iSCSI option ROM
Version 1.18 is the minimum required for use with the EVA iSCSI connectivity option.
NOTE:
For Windows, Version 2.4.2.0 is the minimum required mpx firmware.
QLogic iSCSI Host Bus adapter
The following sections summarize QLogic iSCSI Host Bus adapter (HBA) requirements.
Supported operating systems for the QLogic iSCSI HBA
The QLogic iSCSI HBA supports the following operating systems:
• Red Hat Enterprise Linux 5, Update 1
• SUSE Linux Enterprise Server 10
• SUSE Linux Enterprise Server 10 SP1
• Red Hat Enterprise Linux 4 AS Update 5, Update 6 (requires driver diskette kit: DD-Kit)
• SUSE Linux Enterprise Server 9 SP3, SP4 (requires driver diskette kit: DD-Kit)
• Windows Server 2008
• Windows Server 2003
Go to http://www.qlogic.com/products/iscsi_products_hba.asp to obtain the driver diskette kit.
Supported hardware
QLA4052C and QLA4062C is supported.
Supported BIOS
Obtain the latest supported BIOS from the QLogic website:
www.qlogic.com
Installing the OS on HP Multifunction Gigabit Server Adapters
See the HP iSCSI Boot for Linux User Guide for instructions for installing the OS in HP Multifunction
Gigabit server adapters:
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&
lang=en&cc=us&docIndexId=179111&taskId=101&prodTypeId=329290&prodSeriesId=1155257
iSCSI Boot from SAN 132