HP 3000 Enterprise Virtual Array - Manual (Page 146)

show stats
show system
show targets [ fc | iscsi ]
shutdown
target [ add | rm ]
targetmap [ add | rm ] - Not supported
History command
Displays a history of the commands the user has issued through the CLI.
Admin session only to set Authority
history Syntax
Closing a Telnet window during an admin session does not release the
session. You must either wait for the admin session to time out, or use
the Admin Cancel command. Notes
The following is an example of the history command:
mpx100 (admin) #> history
mpx100 (admin) #> history
1: admin start
2: help
3: history
mpx100r (admin) #>
Example
Image command
Updates and the mpx100/100b firmware image and cleans up (removes) the image files in the
mpx100/100b /var/ftp directory.
Admin session only to set Authority
image
cleanup
unpack
list
Syntax
cleanup : Removes any firmware image filed in the mpx100/100b /
var/ftp directory. These are files transferred by the user when
updating the mpx100/100b firmware image.
unpack [<filename>] : Unpacks the firmware image file specified
in the filename parameter and installs the firmware image on the
mpx100/100b. The mpx100/100b must be rebooted for the new
firmware image to be activated. The firmware image file must first have
been transferred to the mpx100/100b /var/ftp directory using ftp.
list : Displays the firmware files available for load.
Keywords
Command line interface 146