HP 3000 Enterprise Virtual Array - Manual (Page 153)

Admin session Authority
set chap Syntax
The following is an example of the set chap command:
mpx100 (admin) #> set chap
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0
iqn.2004-08.com.hp.mpx100.0539A01064.0.2000002037fd8bab.
2200002037fd8bab
1
iqn.2004-08.com.hp.mpx100.0539A01064.1.2000002037fd8bab.
2200002037fd8bab
Please select a presented target from the list above ('q' to quit): 0
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the Enter key to accept the current
value. If you wish to terminate this process before reaching the end of
the list press 'q' or 'Q' and the Enter key to do so.
CHAP (0=Enable, 1=Disable) [Disabled]
All attribute values for port 1 that have been changed will now be saved.
Example
Set FC command
Configures an FC port.
Admin session Authority
set fc [<port_num>] Syntax
port_num : The number of the FC port to be configured. Parameters
The following is an example of the set fc command:
mpx100 (admin) #> set fc
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the Enter key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the Enter key to do so.
WARNING:
The following command might cause a loss of connections to both ports.
Configuring FC Port: 1
-------------------------
Link Rate (0=Auto, 1=1Gb, 2=2Gb, 4=4Gb) [Auto ]
Frame Size (0=512B, 1=1024B, 2=2048B) [2048 ]
Execution Throttle (Min=16, Max=256) [64 ]
All attribute values for Port 1 that have been changed will now be saved.
Configuring FC Port: 2
-------------------------
Programmed Link Rate (0=Auto, 1=1Gb, 2=2Gb, 4=4Gb) [Auto ]
Frame Size (0=512B, 1=1024B, 2=2048B) [2048 ]
Execution Throttle (Min=16, Max=256) [64 ]
All attribute values for Port 2 that have been changed will now be saved.
Examples
EVA iSCSI Connectivity User Guide 153