HP 3000 Enterprise Virtual Array - Manual (Page 155)

Set iSNS command
Configures iSNS parameters for an iSCSI port.
Admin session Authority
set isns [<port_num>] Syntax
port_num : The number of the iSCSI port to be configured for iSNS. Parameters
The following is an example of the set isns command:
mpx100 (admin) #> set isns
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the Enter key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the Enter key to do so.
Configuring iSNS iSCSI Port: 1
--------------------------------
iSNS (0=Enable, 1=Disable) [Disabled ] 0
IP Address [0.0.0.0 ] 10.0.0.3
TCP Port No. [3205 ]
All attribute values for Port 1 that have been changed will now be saved.
Configuring iSNS iSCSI Port: 2
--------------------------------
iSNS (0=Enable, 1=Disable) [Disabled ]
All attribute values for Port 2 that have been changed will now be saved.
Examples
Set MGMT command
Configures the mpx100/100b management port (10/100).
Admin session Authority
set mgmt Syntax
port_num : The number of the iSCSI port to be configured for iSNS. Parameters
The following is an example of the set mgmt command:
mpx100 (admin) #> set mgmt
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the Enter key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the Enter key to do so.
Mode (0=Static, 1=DHCP, 2=Bootp, 3=Rarp) [Dhcp ] 1
IP Address [10.0.0.1 ]
Subnet Mask [255.0.0.0 ]
Gateway [0.0.0.0 ]
All attribute values that have been changed will now be saved.
mpx100 (admin) #> set mgmt
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the Enter key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the Enter key to do so.
Mode (0=Static, 1=DHCP, 2=Bootp, 3=Rarp) [Static ] 1
All attribute values that have been changed will now be saved.
Examples
EVA iSCSI Connectivity User Guide 155