Storage setup for windows (single-path), Connected target status, Figure 25 – HP 3000 Enterprise Virtual Array User Manual
Page 71
Figure 25 Connected target status
.
NOTE:
Each target represents a path to the EVA. Logging into multiple targets may inadvertently
present the same LUN multiple times to the operating system.
Storage setup for Windows (single-path)
To set up LUNs using HP Command View:
1.
Set up LUNs using HP Command View.
See
Using HP Command View EVA to configure LUNs to iSCSI initiators
2.
Set up the iSCSI drive on the iSCSI Initiator:
a.
Open the Windows Computer Management window.
b.
Select Disk Management.
c.
Select Action > Rescan Disks. The newly created Vdisk should appear as a disk to the oper-
ating system; if it does not, reboot the iSCSI Initiator.
d.
Format and partition the disk.
About Microsoft Windows server 2003 scalable networking
pack
The Microsoft Windows Server 2003 Scalable Networking Pack contains functionality for offloading
TCP network processing to hardware. TCP Chimney is a feature that allows TCP/IP processing to be
offloaded to hardware. Receive Side Scaling allows receive packet processing to scale across multiple
CPUs.
HP’s NC3xxx Multifunction Gigabit server adapters and Alacritech's SES2xxxxx adapters support
TCP offload functionality using Microsoft’s Scalable Networking Pack (SNP).
For more support details, read the latest HP adapter information for more support details.
To download the SNP package and for more details see:
EVA iSCSI Connectivity User Guide
71