HP Netserver L Server series - Manual (Page 107)

Chapter 5 Monitoring
101
NOTE Right-clicking the mouse on a Logical Drive highlights its
associated physical drives.
Displaying Controller Information
The Display Controller Information window is accessed from the Administration
menu. You may also use its icon, as shown in Figure 5-6:
Figure 5-6. Selecting Display Controller Information
The following information is displayed in the Controller Information window:
◊ The controller model of this controller
◊ If an Intelligent BBU (Battery Backup Unit) is installed (N/A for not
supported on the current controller)
◊ The firmware and BIOS versions residing on the controller
◊ The cache size and Flash ROM size
◊ If the controller is part of a dual active (fault tolerant) pair
◊ The number of ports on this controller
◊ The bus width (for data transfers) and bus speed (MB/sec)
◊ The bus type (SCSI, Fibre) and number of channels on the controller
◊ The number of physical devices installed and the maximum number of
physical devices this controller can hold