HP Netserver L Server series User Manual
Page 45
Chapter 4
Configuration
39
Figure 4-11. Pager Setup Dialog Box
3. In the Pager setup box:
◊
Enable or disable this Pager entry using the Enabled check box.
◊
Enter the Modem Setup String, or keep the default.
◊
Enter a Pager Prefix, or keep the default. See Step 4 below.
◊
Enter the phone number of the person or location that will receive the
page when sent.
◊
Enter a Pager Suffix if needed. See Step 4 below.
◊
Enter a Pager Delay interval in seconds. The value of each comma is 1
second. See Step 4 below.
◊
Enter the Modem Hang-up String, or keep the default.
◊
Select the appropriate button for a Numeric or Alphanumeric pager.
4.
If you need to enter a Message Prefix, Suffix, or Delay interval, click
Advanced.
5.
Enter the desired information and click OK to return to the Pager setup
box.