HP Netserver L Server series - Manual (Page 129)

Chapter 5 Monitoring
123
1. Click the Cancel.. button to stop the rebuild.
◊ You may need to check the View menu to see if Rebuild Status is still
enabled.
◊ If so, you may need to cancel other rebuilds as well.
2. Click the Close button to close the Rebuild Status box at any time.
Consistency Check Status
If a consistency check process is currently underway, open the Consistency Check
Status box to monitor the progress, or cancel the process, as shown in Figure 5-27.
Figure 5-27. Selecting Consistency Check Status
Figure 5-28. Consistency Check Status Box
The Consistency Check Status box displays the progress of a logical drive
consistency check. See Figure 5-28.