HP Netserver L Server series - Manual (Page 70)

Chapter 4 Configuration
64
Figure 4-28. RAID Assistant Welcome Dialog Box
In the RAID Assistant Welcome dialog box, select one of the following options
(see Figure 4-28):
•
Click the Automatic Configuration button, if you want to provide only
minimal input and allow RAID Assistant to set up an optimal configuration
automatically, or
•
Click the Assisted Configuration button, if you want RAID Assistant to
lead you step-by-step through the configuration, or
•
Click the Manual Configuration button, if you want full control over your
configuration setup or wish to do LUN Mapping, or
•
Click Cancel, if you want to exit RAID Assistant without any changes.
Automatic Configuration
Automatic Configuration provides two options:
•
New Configuration - Sets up a new configuration on the controller,
deleting the previous configuration and data (if any).
•
Add Logical Drive - Sets up additional arrays (logical drives) leaving the
existing array(s) intact. At least one array must be configured on this
controller and un-configured drive space must remain.