HP VMA-series Memory Arrays - Manual (Page 142)

142 AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide
On a system with clustering, only save the configuration on the local box instead
of attempting to save on all cluster members.
configuration delete <name>
configuration move <source name> <dest name>
configuration copy <source name> <dest name>
Delete, move (rename), or copy a configuration file. These do not affect the current
running configuration. The active configuration file may not be deleted or
renamed, nor may it be the target of a move or copy. It may be the source of a copy,
in which case the original remains active.
configuration fetch <URL> [<name>]
Download a configuration file from a remote host.
configuration upload <name> <URL>
configuration upload active <URL>
Download or upload a configuration file. A file may not be downloaded over the
active configuration file. If no name is specified for a configuration fetch, it is
given the same name as it had on the server. If active is specified for a
configuration upload, the currently-active configuration file is uploaded. No
configuration file may have the name active .
See Key to Command Parameters on page 120 for a description of valid URLs.
Note: If downloading configuration files from another system running the
vCLUSTER management system, they can be found in the /config/db directory.
So an example command line to fetch the initial configuration database would
be: configuration fetch scp://admin:password@hostname/config/db/
initial write memory
Same as configuration write , provided for Cisco compatibility.
write memory local
Same as configuration write local , provided for Cisco compatibility.
write terminal
Same as show running-config , provided for Cisco compatibility.
configuration jump-start