HP VMA-series Memory Arrays - Manual (Page 195)

AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide 195
Caution: Changing the cluster management address is not recommended.
You can use controls in the Network page to enable routing by global default
gateways and to set a global default gateway, or you can disable the use of global
default gateways.
DNS Settings Page
The DNS Settings page shows the list of DNS servers available to the HP VMA
SAN Gateway cluster. If one or more IP addresses for DNS servers were set up as
part of the initial out-of-the-box setup, they are listed here.
The rest of the fields on the page allow you to configure additional DNS servers
that the HP VMA SAN Gateway cluster can use, or to add or remove domain
names.
Figure B.14 DNS Settings Page