HP VMA-series Memory Arrays User Manual
Page 58
58
AM456-9007B Rev 02
HP VMA SAN Gateway Installation and User Guide
Note that an asterisk (*) appears before the command prompt to remind you that
changes have been made to the HP VMA SAN Gateway cluster, which have not
yet been saved.
In this example, the
write memory
command is used to save changes to the
cluster configuration:
In the VMA Web Interface, the Commit Changes button appears in the message bar
only when the current configuration includes changes that have not yet been saved;
otherwise, the message bar displays a No Unsaved Changes message. For more
Understanding the Commit Changes Button
Switching Configuration Files
To switch to another configuration file, save the current configuration to a specified
file name using the
configuration write to <filename
> command.
In the following example, the
configuration write to cf1
command i s used
to save the configuration to a file named
cf1
and to make that file the active
configuration file:
In the VMA Web Interface, use the
Save Configuration as: <filename>
option in the Cluster Administration page. Enter a filename and click the Save
button. For more information, see
Saving Without Switching Configuration Files
To save the current configuration to a different file, without making the new file the
active configuration file, use the
no-switch
option of the
configuration
write to
command.
* gateway02 [cluster1: master] (config) # write memory
gateway02 [cluster1: master] (config) #
█
gateway02 [cluster1: master] (config) # configuration write
to cf1
gateway02 [cluster1: master] (config) #
█
* gateway02 [cluster1: master] (config) # configuration
write to cf2 no-switch
* gateway02 [cluster1: master] (config) #
█