HP VMA-series Memory Arrays User Manual
Page 47
AM456-9007B Rev 02
HP VMA SAN Gateway Installation and User Guide
47
6.
To return to the configuration wizard after exiting, enter the command
configuration jump-start
in the CLI. This command can be used
anytime to change the configuration settings.
Getting Help During Configuration
Additional usage advice is provided at the beginning of the wizard.
24. Cluster management IP address: 10.3.19.61
25. Cluster management IP netmask: 255.255.252.0
To change an answer, enter the step number to return to.
Otherwise hit <enter> to save changes and exit.
Choice:
█
HP VMA SAN Gateway configuration wizard
Press '?' for help, Ctrl+B to go back to the previous step.
Default value is in square brackets: press Enter to accept
it.
Press Ctrl+R to clear default to enter empty string.
Press Ctrl+C to jump to the end of the wizard at any time.