HP ProLiant SL250s Gen8 Server - Manual (Page 18)

Operations 18
o Right node
2. Install the server into the chassis (" Installing the server into the chassis " on page 31 ).
3. Connect all peripheral cables to the server.
4. Power up the server (on page 15 ).
Remove the interposer board
1. Power down the server (on page 15 ).
2. Disconnect all peripheral cables from the server.
3. Remove the server from the chassis (on page 15 ).
4. Remove the front GPU cage (on page 16 ).
5. Remove the interposer board.