HP ProLiant SL250s Gen8 Server - Manual (Page 50)

Hardware options installation 50
o Right node
14. Install the front GPU bracket (on page 20 ).
15. Install the interposer board (on page 19 ).
16. Install the front GPU cage (on page 17 ).
17. Install the server into the chassis (" Installing the server into the chassis " on page 31 ).
18. Connect all peripheral cables to the server.
19. Power up the server (on page 15 ).
Installing a quick-release drive
1. Power down the server (on page 15 ).
2. Remove the server from the chassis (on page 15 ).
3. Install a SFF quick-release drive cage (" Installing SFF quick-release drive cages " on page 45 ).
4. If installing a drive in the front GPU cage, remove the front GPU cage (on page 16 ).