Redundant hot-plug power supply option – HP ProLiant SL250s Gen8 Server User Manual
Page 68
Hardware options installation 68
Item
Connector
Description
server front panel
3
Video
For connecting a video monitor
4
USB
For connecting up to two USB devices
5
Serial
For trained personnel to connect a null modem
serial cable and perform advanced diagnostic
procedures
Redundant hot-plug power supply option
CAUTION:
All power supplies installed in the server must have the same output power capacity.
Verify that all power supplies have the same part number and label color. The system becomes
unstable and may shut down when it detects mismatched power supplies.
Label color
Output
Orange
750 W
Green
1,200 W
White
1,200 W -48Vdc
Yellow
1,500 W
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
To install the component:
1.
Unfasten the cable management solution to access the power supply bays.
2.
Remove the power supply blank.