HP Designjet Z3200 PostScript Photo Printer series - Manual (Page 126)

3. Insert the ink cartridge into its slot.
4. Push the cartridge into the slot until it snaps into position. You should hear a beep and see
confirmation that the cartridge has been inserted.
If you have difficulty, see Cannot insert an ink cartridge on page 168 .
5. When all cartridges have been inserted, close the cover.
6. The front-panel display confirms that all cartridges have been correctly inserted, press the OK key
on the front panel.
About the printheads
The printheads are connected to the ink cartridges and jet ink onto the paper.
116 Chapter 9 Handling ink cartridges and printheads ENWW
Ink
and
p
rin
thea
ds