HP Designjet Z3200 PostScript Photo Printer series - Manual (Page 172)

● The borders of colored blocks are wrongly colored.
To correct this kind of problem:
1. Reseat the printheads by removing them and then reinserting them. See Remove a printhead
on page 117 and Insert a printhead on page 119 .
2. Align the printheads. See Align the printheads on page 172 .
Lines are discontinuous
If your lines are broken in the following way:
1. Check that you are using appropriate print-quality settings. See Printing on page 45 .
2. Reseat the printheads by removing them and then reinserting them. See Remove a printhead
on page 117 and Insert a printhead on page 119 .
3. Align the printheads. See Align the printheads on page 172 .
162 Chapter 13 Troubleshooting print-quality issues ENWW
Print
-q
ua
lit
y i
s
su
es