HP NonStop G-Series - Manual (Page 174)

enclosure. For an illustration of an IOMF2 CRU, see the NonStop S-Series Hardware Installation and FastPath
Guide.
3. Lower the ejector on the power supply to its fully open position. This action disconnects the power supply from
the power interface board (PIB) and the AC power cord directly behind it.
4. With one hand, grasp the handle of the power supply and slide the power supply partway out of the slot.
5. Using your other hand to support the weight of the power supply, slide the power supply all the way out of the
slot.
174 System Resources