HP NonStop G-Series - Manual (Page 273)

Software Requirements for Split-Star and Tri-Star Topologies
Any node that will participate in a ServerNet cluster must have Expand (T9057) software, which is delivered on the
site update tape (SUT). In addition, the Expand/ServerNet Profile (T0569) is required for clustering. If you order the
optional Expand/ServerNet Profile component, it is delivered on the SUT.
Additional software requirements depend on the topology you use to construct the ServerNet cluster:
Tri-Star Topology Split-Star Topology Software Component
G06.13 or later
(G06.13 requires SPRs) G06.09 or later
(G06.09, G06.10, and G06.11 require SPRs) Operating system
Depends on operating system. For compatibility
information, see the SNETMON/MSGMON
softdoc. Depends on operating system. For
compatibility information, see the
SNETMON/MSGMON softdoc. SNETMON/ MSGMON
T0502AAG or superseding T0502AAE or superseding SANMAN
T0569AAE or superseding T0569AAB or superseding Switch Firmware and
Configuration
T2752AAB or superseding T2752AAB or superseding OSM Client
G06.21 or later
(Server components should be AAB or
superseding.) G06.21 or later
(Server components should be AAB or
superseding.) OSM Server
T1089ABC or superseding T1089ABB or superseding SP firmware
T9082ACQ or superseding T9082ACQ or superseding SCF
Software Requirements for Split-Star and Tri-Star Topologies 273