HP NonStop G-Series - Manual (Page 65)

Viewing the Alarms Dialog Box
To reach this dialog box, either:
•
Right-click any object in the tree pane or view panes and select Alarms.
•
Highlight any object in the tree pane or view panes and select Alarms from the Display menu.
The Alarms dialog box displays the alarms associated with a selected resource. You can select individual alarms for
the resource and display detailed information and available repair actions or act on those alarms. To view a summary
of alarms for the entire system, see
Viewing a Summary of Alarms .
The Alarms dialog box provides this information about the selected alarm:
•
Alarm severity
The Severity column contains a colored icon corresponding to the severity of the alarm. Red icons represent
Critical and Major alarms.Yellow icons represent Minor, Warning, and Indeterminate alarms. See
Alarm Severity .
•
Time and date the alarm occurred
•
Description of the alarm, including the probable cause
•
The type of alarm
•
Whether the alarm is dialed out to your service provider (assuming your system console is configured to dial
out)
You can also view alarms for a selected resource without opening the Alarms dialog box as explained in Viewing the
Alarms Tab .
To display detailed information for an alarm:
Highlight the alarm and then click Detail. See also Viewing Alarm Details .
To act on an alarm:
Highlight the alarm and click:
•
Delete
•
Suppress
•
Unsuppress
Viewing the Alarms Dialog Box 65