Firmware, Actions, Abort – HP NonStop G-Series User Manual
Page 183: Firmware update, Responsive test, Start, Stop, Test verify
Displayed for CCSA SACs only, displays the type of CCSA SAC (for example:
SS7TE3A).
SAC Type
Firmware
The version of the boot firmware for the SAC.
Version
The name of the file to be used for a (boot)
.
Default File Name
The version of the firmware to be used for a (boot)
.
Default File Version
The differences, if any, between the current and default boot firmware versions.
Compare State
Actions
Abort
Terminates operation of the ServerNet Adapter ServerNet addressable controller. When the Abort action finishes, the
SAC is in the Stopped state.
Firmware Update
Updates the boot firmware for the adapter SAC.
NOTE:
Upon completion of the firmware update action, use the Start action on the SAC.
Responsive Test
Runs an online test that verifies the SAC is integrated with the LAN subsystem, is owned, and is in the Started state.
Start
Loads the controller operational code and starts the ServerNet addressable controller. The SAC must be in the Stopped
state before you perform this action. When the Start action completes, the SAC is in the Started state.
Stop
Rather than automatically stopping the SAC (as the Abort action does), this action first warns you if the SAC is currently
in use (and stops it only after you confirm).
Test Verify
Runs the power-on self-test for the SAC component of the CRU. To perform this action, the CRU must be in the Started
state, and the SAC component must be in the Stopped or Diagnose state.
SAC (ServerNet Addressable Controller)
183