Snmp settings screen – HP UPS Network Module User Manual
Page 40
HP UPS Network Module web interface 40
3.
In the Status field, select Enabled to activate the scheduled shutdown or select Disabled to disable the
scheduled shutdown.
4.
In the Schedule Frequency field, select One Time, Every Day, or Every Week to set the occurrence of the
scheduled shutdown.
5.
In the Shutdown (Date/Time) field:
a.
Enter a date for the scheduled shutdown to begin in the format yyyy/mm/dd or choose a date from
the calendar.
b.
Select the hour for the scheduled shutdown to begin.
c.
Select the minute for the scheduled shutdown to begin.
6.
In the Restart (Date/Time) field:
a.
Enter a date for the scheduled restart in the format yyyy/mm/dd or choose a date from the
calendar.
b.
Select the hour for the scheduled shutdown to restart.
c.
Select the minute for the scheduled shutdown to restart.
7.
Click Save. A warning message appears if scheduled shutdowns conflict, or if there is more than seven
days between shutdown and restart of an Every Week periodicity.
Click Cancel to go back to the previous screen.
Click Help to view online help.
SNMP Settings screen
Click SNMP in the menu tree to display the SNMP Settings screen. This screen allows an administrator to
configure SNMP settings for computers that use the HP Power MIB to request information from the UPS
Network Module.