HP UPS Network Module - Manual (Page 49)

HP UPS Network Module Configuration Menu 49
Option number Submenu Description
2 Network Configuration Enables network configuration for the UPS
Network Module
3 Set Login Password to Default Restores the login password to the default
password
4 Return to Default Configuration Restores all settings to the default parameters
(on page 76 )
0 Exit Exits the Configuration Menu
Reset submenu
Option number Submenu Description
1 Hardware Reset Restarts the electrical power supply for the UPS
Network Module
2 Restart Application Restarts the UPS Network Module application
0 Exit Returns to the previous menu
Network Configuration submenu
Option number Submenu Description
1 Read Network Settings Enables you to view IPv4 and IPv6 network
settings for the UPS Network Module
2 Modify Network Settings Enables you to change IPv4 network settings for
the UPS Network Module
3 Set Ethernet Speed Enables you to configure the port speed for the
RJ-45 Ethernet network connector
0 Exit Returns to the previous menu