Optional power monitoring using snmp, Snmp monitoring – HP UPS Network Module User Manual
Page 53
Advertising
Optional power monitoring using SNMP 53
Optional power monitoring using SNMP
SNMP monitoring
Battery status, power status, events, and traps can be monitored using third-party SNMP managers. SNMP
monitoring supports the RFC-1628 MIB and the HP Power MIB (CPQPOWER.MIB).
To query SNMP data, you do not need to add SNMP Mangers to the Notified Application page.
In the third-party SNMP manager, configure the IP address of the UPS Network Module, select SNMP V1 or
V1&V3, and then compile either CPQPOWER.MIB or UPS.MIB (RFC1628) to be monitored by the SNMP
manager.
The HP Power MIB (CPQPOWER.MIB) can be downloaded from the HP website
Advertising