HP Designjet Z2100 Photo Printer series User Manual
Page 100
5.
Insert the new printhead into its correct slot in the carriage.
CAUTION
Insert the printhead slowly and vertically, straight down. It may be damaged if
you insert it too fast, or at an angle, or if you rotate it as you insert it.
6.
Push down as indicated by the arrow shown below.
CAUTION
When installing the new printhead there may be some resistance, so you need
to press it down firmly but smoothly. You should hear a beep and see confirmation on the
front-panel display that the printhead has been inserted. If you have difficulty, see
insert a printhead on page 140
.
7.
Insert any other printheads, that need to be installed, with the same procedure, then close the
carriage lid.
90
Chapter 8 Handling ink cartridges and printheads
ENWW
Handling ink cartridges
and p
rin
th
eads