Change the language of the front-panel display, Access the embedded web server, Mac os), see – HP Designjet Z2100 Photo Printer series User Manual

Page 29: Access hp easy printer, Inter utility (mac os), see, Access

Advertising
background image

Tip

It is strongly recommended to leave the printer powered on or in sleep mode to avoid

wasting ink and time.

Change the language of the front-panel display

There are two possible ways to change the language of the front-panel menus and messages.

If you can understand the current front-panel display language, press the

Menu

key to return to the

main menu and select the Setup menu icon

, then Front panel options > Select language.

If you cannot understand the current front-panel display language, start with the printer powered
off. At the front panel, press the

OK

key and hold it down. While holding the

OK

key down, press

the

Power

key and hold it down. Continue to hold down both keys until the green light on the right

side of the front-panel display starts flashing, and then release both keys. You can expect a delay
of about one second. If the green light starts flashing without any delay, you may need to start
again.

Whichever method you used, the language selection menu should now appear on the front-panel
display. Highlight your preferred language with the

Up

and

Down

keys, then press the

OK

key.

Access HP Easy Printer Care (Windows) or HP Printer

Utility (Mac OS)

HP Easy Printer Care (Windows) or HP Printer Utility (Mac OS) enables you to manage your printer
from a computer with a USB connection and TCP/IP.

Under Windows, start HP Easy Printer Care from your desktop shortcut or from Start > All
Programs
> Hewlett-Packard > HP Easy Printer Care > Start HP Easy Printer Care. This
launches HP Easy Printer Care showing the printers installed.

Under Mac OS, launch the Mac Printer Utility by selecting STARTUP_DISK > Library >
Printers > hp > Utilities > HP Printer Utility. This launches the HP Printer Selector where you
need to add your printer by clicking More Printers.

Select your printer and click Launch Utility. This launches the HP Printer Utility.

If you have followed these instructions but failed to get through to HP Easy Printer Care (Windows) or
HP Printer Utility (Mac OS), see

Cannot access HP Easy Printer Care (Windows) or HP Printer Utility

(Mac OS) on page 149

.

Access the Embedded Web Server

The Embedded Web Server enables you to manage your printer remotely using an ordinary Web
browser running on any computer.

NOTE

To use the Embedded Web Server, you must have a TCP/IP connection to your printer.

The following browsers are known to be compatible with the Embedded Web Server:

Internet Explorer 5.5 or later, for Windows

Internet Explorer 5.1 or later, for Mac OS X

Netscape Navigator 6.01 or later

Mozilla 1.5 or later

ENWW

Change the language of the front-panel display

19

Perso

n

aliz

in

g th

e printer

Advertising