HP Officejet H470wf Mobile Printer - Manual (Page 13)

4 Media width guide – Adjusts to accommodate different media sizes. Slide to the right to
accommodate narrow media. This automatically slides the narrow media guide to the left
to ensure that media is aligned for correct print margins.
5 Narrow media guide – When you move the media width guide to the right, this guide
automatically slides to the left to accommodate narrower media.
6 Print cartridge latches – Lift these latches for easy removal and insertion of print
cartridges.
7 Print cartridge cradle compartments – Holds the print cartridges.
8 Front access cover – Provides access to the print cartridges and for clearing paper
jams. This cover must be closed before printing can begin.
9 Output slot – Media exits the device from here.
10 Output door – Drops open automatically when the device is turned on. Allows media to
exit the device.
Back and side view
1 Battery contacts – Provides contact for power from the optional battery. For more
information, see
HP supplies and accessories .
2 Battery contact cover – Covers the battery contacts when the optional battery is not
installed.
3 Battery slot – Battery installs here.
4 PictBridge/USB Host Port – Connects a PictBridge device, such as a digital camera, a
USB Flash drive, or an 802.11 or USB device.
5 USB port – Connect a USB cable here.
6 Wireless profile switch – Store settings for up to three 802.11 computers or networks.
This allows you to easily move the device from home to the office or between any three
wireless network environments.
7 Power connector – Connect the power cord here.
(continued)
Understand the device parts 9