Configure the device (windows), Direct connection – HP Officejet H470wf Mobile Printer User Manual
Page 49
To print a demo page
Hold down (Power button) and press
(Resume button) one time.
You can print a demo page to verify that your device is working. However, if you want
to verify that the device is connected to the computer correctly, or that the device
software is working correctly, print a test page from the General tab in the Printer
Properties dialog box (Windows) or the configuration page from the Device
Information panel in the HP Printer Utility (Mac OS).
Print device information pages from the software
You can connect to the printer to print the following device information pages from the
printer software.
To print a test page from the Toolbox (Windows)
1. Open the Toolbox. For more information, see
.
2. Click the Printer Services tab.
3. Click Print Configuration Page.
NOTE: If you are using a Pocket PC or Palm OS device, you can use the
Toolbox software for PDAs. For more information, see
.
To print a configuration page from the printer driver (Windows)
1. Open the printer driver.
2. Click Properties.
3. Click the Services tab.
4. Click Print Configuration Page.
To print a test page from the HP Printer Utility (Mac OS)
1. Open the HP Printer Utility. See
2. On the Test panel, click Print Test Page.
Configure the device (Windows)
You can connect the device directly to a computer, or you can share the device among
other users on a network.
NOTE: Microsoft Internet Explorer 6.0 must be installed on the computer system
to run the installation program.
Also, you must have administrator privileges to install a printer driver on Windows
2000, Windows XP, Windows Server 2003, or Windows Vista.
When setting up the device, HP recommends that you connect it after you install the
software because the installation program is designed to provide you with the easiest
setup experience. However, if you have connected the cable first, see
device before installing the software
Configure the device (Windows)
45