HP Officejet H470wf Mobile Printer - Manual (Page 30)

Print on both sides (duplexing)
You can print on both sides manually using the Windows printer software.
You can print on both sides of a sheet using a Mac by first printing the odd-numbered
pages, turning the pages over, and then printing the even-numbered pages.
• Guidelines for printing on both sides of a page
• To perform duplexing (Windows)
• To perform duplexing (Mac OS)
Guidelines for printing on both sides of a page
• Always use media that conforms to the device specifications. For more
information, see
Understand specifications for supported media .
• Specify duplex options in your application or in the printer driver.
• Do not print on both sides of transparencies, envelopes, photo paper, glossy
media, or paper lighter than 18 lb bond (75 g/m
2 ). Jams might occur with these
media types.
• Several kinds of media require a specific orientation when you print on both sides
of a page, such as letterhead, preprinted paper, and paper with watermarks and
prepunched holes. When you print from a computer running Windows, the device
prints the first side of the media first. When you print from a computer using the
Mac OS, the device prints the second side first. Load the media with the front side
facing down.
To perform duplexing (Windows)
1. Load the appropriate media. See Guidelines for printing on both sides of a page
and Load media .
2. With a document open, on the File menu, click Print, and then click Properties.
3. Click the Features tab.
4. Choose Manual from the two-sided printing drop-down list.
5. To automatically resize each page to match the document's onscreen layout,
ensure Preserve Layout is selected. Clearing this option might result in unwanted
page breaks.
6. Select or clear the Flip Pages Up check box to match the way you want the
binding. See the graphics in the printer driver for examples.
7. Change any other desired settings and click OK.
8. Print your document.
9. After the first side of the document is printed, follow the onscreen instructions and
reload the paper into the tray to complete printing.
10. After reloading the paper, click Continue in the onscreen instructions to continue
the print job.
Chapter 3
26 Use the device