Clearing the hardware compression faults – HP StorageWorks 6000 Virtual Library System User Manual
Page 196
•
Test type — Background or Read-only
•
Storage pools — All or the number of the storage pool tested
•
Test start time
•
Test end time
•
Current job count
•
Total job count
•
Total amount of data written during the test
•
Total amount of data read during the test
•
Total number of successful jobs
•
Total number of failed jobs
•
Status of the test
Decompression errors will be logged once per occurrence. The data fields are in order as follows.
See “
” on page 195 for descriptions not defined here:
•
Decompression_error — indicates that this row of data is the decompression information.
•
Decompression error ID
•
Time the error occurred
•
sDev Number
•
LBA
•
Offset
•
Length
•
UUID
Jobs are only logged in event of a job failure. The data fields are in order as follows:
•
Job — indicates that this row of data is the job information
•
Job ID
•
Date of the test
•
Generated job key
•
Test start time
•
Time of last update to the job
•
Test end time
•
Number of the storage pool tested
•
Total amount of data written during the test at this point
•
Direction — read or write
•
Result — success or fail
•
Message, if any, associated with the failed job
•
External connect error, if any
•
Source barcode of the job
•
Target barcode of the job
Clearing the Hardware Compression Faults
If the VLS node is showing a hardware compression status that you think is incorrect, or if you want
to verify the status shown, you can force a rescan of the node.
From Command View VLS:
1.
On the System tab, expand Chassis in the navigation tree.
Monitoring
196