HP StorageWorks 6000 Virtual Library System - Manual (Page 63)

4. Connect the node power supply AC power connectors to two separate AC power sources using
the power cables provided (
Figure 36 ).
Figure 36 Connecting power supply AC power connectors to AC power sources
. 5. Secure the power cords with the retaining clips ( Figure 37 ).
Figure 37 Securing the power cords
. 6. Connect the disk array power supply AC power connectors on the left-side to one AC power
source using the power cables provided. Then, connect the disk array power supply AC power
connectors on the right-side to a second AC power source using the power cables provided
(
Figure 38 ).
Figure 38 Connecting the disk array power supplies to an AC power source
.
Installation is complete. You may now power up the disk arrays and then the node as described in
Operation .
HP StorageWorks 6000–series Virtual Library System User Guide 63