HP StorageWorks 6000 Virtual Library System - Manual (Page 270)

5. Slide the component out the front of the node.
Figure 85 Removing the processor zone fan module
.
To replace the component, reverse the removal procedure.
DIMM
1. Power off the node. See Powering Off the System .
2. Extend or remove the node from the rack. See Extending the Node from the Rack .
3. Remove the access panel. See Removing the VLS Node Access Panel .
4. Open the DIMM slot latches (1).
5. Remove the DIMM.
Figure 86 Removing the node DIMM
.
CAUTION:
Use only Compaq branded or HP DIMMs. DIMMs from other sources may adversely affect data
integrity.
To replace the component, reverse the removal procedure.
Component Replacement 270