HP StorageWorks 6000 Virtual Library System - Manual (Page 222)

Description Item
Hard drive blank 6
Hard drive 2 7
Hard drive 1 8
Front Panel LEDs and Buttons
Status Description Item
Green = System is on.
Amber = System is shut down, but power is still
applied.
Off = Power cord is not attached, power supply
failure has occurred, no power supplies are
installed, facility power is not available, or
disconnected power button cable.
Power On/Standby button and system power
LED
1
Blue = Identification is activated.
Flashing blue = System is being remotely
managed.
Off = Identification is deactivated.
UID button/LED 2
Green = System health is normal.
Amber = System health is degraded. To identify
the component in a degraded state, refer to
HP
Systems Insight Display LEDs and Internal Health
LED Combinations
.
Red = System health is critical. To identify the
component in a critical state, refer to
HP Systems
Insight Display LEDs and Internal Health LED
Combinations
.
Off = System health is normal (when in standby
mode).
Internal health LED 3
Green = Power supply health is normal.
Amber = Power redundancy failure occurred.
Off = Power supply health is normal when in
standby mode.
External health LED (power supply) 4
Component Identification 222