HP Integrated Lights-Out 2 User Manual
Page 184
Event log explanation
Event log display
Displays when an error has occurred in iLO 2 and iLO 2
has reset itself. If this issue persists, call customer support.
iLO 2 reset by watchdog
Displays when the server resets iLO 2.
iLO 2 reset by host
Displays when a non-critical error has occurred in iLO 2
and iLO 2 has reset itself. If this issue persists, call customer
support.
Recoverable iLO 2 error, code #
Displays when the SMNP trap does not connect to the
specified IP address.
SNMP trap delivery failure: IP address
Displays when the SNMP trap does not connect to the
specified IP address.
Test SNMP trap alert failed for: IP address
Displays when the SNMP trap does not connect to the
specified IP address.
Power outage SNMP trap alert failed for: IP address
Displays when the SNMP trap does not connect to the
specified IP address.
Server reset SNMP trap alert failed for: IP address
Displays when the SNMP trap does not connect to the
specified IP address.
Illegal login SNMP trap alert failed for: IP address
Displays when the SNMP trap does not connect to the
specified IP address.
Diagnostic error SNMP trap alert failed for: IP address
Displays when the SNMP trap does not connect to the
specified IP address.
Host generated SNMP trap alert failed for: IP address
Displays when the SNMP trap does not connect to the
specified IP address.
Network resource shortage SNMP trap alert failed for: IP
address
Displays when the network is connected to iLO 2.
iLO 2 network link up
Displays when the network is not connected to iLO 2.
iLO 2 network link down
Displays when a user starts a firmware upgrade.
iLO 2 Firmware upgrade started by: User
Displays when a user resets the host server.
Host server reset by: User
Displays when a user powers off a host server.
Host server powered OFF by: User
Displays when a user powers on a host server.
Host server powered ON by: User
Displays when a user begins using a Virtual Floppy.
Virtual Floppy in use by: User
Displays when a user logs on a Remote Console session.
Remote Console login: User
Displays when a Remote Console session is closed.
Remote Console Closed
Displays a failed console login and IP address.
Failed Console login - IP Address: IP address
Displays when a local user is added.
Added User: User
Displays when a local user is deleted.
User Deleted by: User
Displays when a local user is modified.
Modified User: User
Displays when a valid user logs on to iLO 2 using an
Internet browser.
Browser login: User
Displays when a valid user logs off iLO 2 using an Internet
browser.
Browser logout: User
Displays when a browser login attempt fails.
Failed Browser login—IP Address: IP address
Displays when an authorized user logs on using the Remote
Console port.
Remote Console login: User
184 Troubleshooting iLO 2