HP Integrated Lights-Out 2 User Manual
Page 185
Event log explanation
Event log display
Displays when an authorized Remote Console user is
logged out or when the Remote Console port is closed
following a failed login attempt.
Remote Console Closed
Displays when an unauthorized user has failed three login
attempts using the Remote Console port.
Failed Console login—IP Address: IP address
Displays when a new entry is made to the authorized user
list.
Added User: User
Displays when an entry is removed from the authorized
user list. The User section displays the user who requested
the removal.
User Deleted by: User
Displays when the user clears the Event Log.
Event Log Cleared: User
Displays when the power has been reset.
Power Cycle (Reset): User
Displays when the Virtual Power Button is used.
Virtual Power Event: User
Displays when the system is booted with the Security
Override Switch set to On.
Security Override Switch Setting is On
Displays when the system is booted with the Security
Override Switch changed from On to Off.
Security Override Switch Setting Changed to Off
Displays when the on-board clock is set. Will display the
previous time or "NOT SET" if there was not a time setting
previously.
On-board clock set; was previously “[NOT SET]"
Displays when the logs are full and the SNMP trap alert
failed for a specified IP address.
Logs full SNMP trap alert failed for: IP address
Displays when the security has been disabled and the
SNMP trap alert failed for a specified IP address.
Security disabled SNMP trap alert failed for: IP address
Displays when the security has been enabled and the
SNMP trap alert failed for a specified IP address.
Security enabled SNMP trap alert failed for: IP address
Displays when an authorized user connects the Virtual
Floppy.
Virtual Floppy connected by User
Displays when an authorized user disconnects the Virtual
Floppy.
Virtual Floppy disconnected by User
Displays when an authorized user adds a license.
License added by: User
Displays when an authorized user removes a license.
License removed by: User
Displays when there is an error activating the license.
License activation error by: User
Displays when an authorized user logs in to iLO 2 RBSU.
iLO 2 RBSU user login: User
A power request was received as one of the following
types:
Power on request received by: Type
Power Button
Wake On LAN
Automatic Power On
Displays when an authorized user selects the Virtual NMI
button.
Virtual NMI selected by: User
Displays when a Virtual Serial Port session is started.
Virtual Serial Port session started by: User
Displays when a Virtual Serial Port session is ended.
Virtual Serial Port session stopped by: User
Displays when there is a login failure for a Virtual Serial
Port session.
Virtual Serial Port session login failure from: User
Event log entries 185