HP Modular Cooling System - Manual (Page 23)

Installation 23
c. Click Sign In.
4. Click Setup>Network.
a. To disable DHCP, click the radio button. The default setting is enabled. Whenever you make a
change regarding DHCP, you must restart the server. A new screen will appear prompting you to
restart.
— To restart the server immediately, select Yes.
— To return to the Network screen, select No.
b. Click Save Settings.
c. In the IP Address field of the management module, change the IP address.
d. Change the network mask of the management module.
e. Change the default gateway of the management module.
f. Click Save Settings. A new screen appears, indicating that the server must be restarted for the
changes to take effect. If any new settings are saved, the server restarts automatically.