HP Modular Cooling System - Manual (Page 5)

Overview 5
Overview
Introduction
The HP Modular Cooling System is an air and water heat exchanger that removes high levels of excess heat
generated by equipment installed in HP racks. The installed equipment takes in cold air through the front of
the closed MCS-100 unit and uses the air for internal cooling. After the air has been warmed, the MCS-100
unit expels the air through the rear vents.
Item Reference
1 Control valve
2 Flow meter
3
Humidity sensor
4 Heat exchanger unit
5 Fan units (1 fan by default, 4 fans maximum)
6 Management module