HP Modular Cooling System - Manual (Page 9)

Installation 9
Installation
MCS-100 kit contents
• MCS-100 unit installed on an HP Rack (1)
• Condensation hose (blue) (1)
• Condensation hose (clear)* (1)
• Power cord, 4 m (13.1 ft), L6-20 to Walther Procon series A5 connector (1)
• Power cord, 4 m (13.1 ft), IEC-309 to Walther Procon series A5 connector (1)
• CAT5e cable, 7.62 m (25 ft) (1)
• USB program cable (1)
• Door sensor bracket for rear extension kit (1)
*This item might ship preinstalled on the MCS-100 unit rather than in the standard kit contents package.
Hardware kit contents
If any of the following items are missing or damaged, contact your HP authorized reseller.
Item Description Quantity
1
M6 screws 24
2 M6 cage nuts
Cage nut tool 24
1