HP LaserJet Enterprise 500 MFP M525 - Manual (Page 30)

Connect the product to a computer by using a USB
cable and install the software (Windows)
This product supports a USB 2.0 connection. Use an A-to-B type USB cable. HP recommends using a
cable that is no longer than 2 m (6.5 ft).
CAUTION: Do not connect the USB cable until the installation software prompts you to connect it.
1. Close all open programs on the computer.
2. Install the software from the CD, and follow the on-screen instructions.
3. When prompted, select the Directly connect to this computer using USB cable option,
and then click the Next button.
4. When the software prompts you, connect the USB cable to the product and the computer.
5. At the end of the installation, click the Finish button, or click the More Options button to install
more software or configure basic digital sending features for the product.
6. Print a page from any program to make sure that the software is correctly installed.
16 Chapter 2 Connect the product and install software ENWW