HP LaserJet Enterprise 500 MFP M525 - Manual (Page 51)

Use the convenience stapler
Activate the stapling mechanism by inserting paper into the convenience stapler.
1. Insert up to 20 sheets of paper that weighs up
to 75 g/m 2 (20 lb) into the slot in the stapler
door. Insert fewer sheets to staple if the paper
weight is heavier than 75 g/m 2 (20 lb).
CAUTION: Do not use the convenience
stapler to staple plastic, cardboard, or wood.
Damage to the convenience stapler can result
from attempting to staple these materials.
NOTE: Exceeding the recommended
capacity can result in jams or damage.
2. Wait for the stapler to staple the sheets. When
it is inserted all the way into the stapler slot,
the paper should trigger the stapler
mechanism.
3. Remove the stapled paper from the slot.
NOTE: If you are unable to remove the
paper after stapling, carefully open the stapler
door and then slide your document out.
ENWW Use the convenience stapler 37