HP 3PAR System Reporter Software - Manual (Page 224)

8.32 Report Options
3PAR System Reporter User’s Guide System Reporter 2.8
8.4.27.1 value:
Specify one or more of the following:
--All Disk Types--
(Default). This value does not exclude disks based on their type.
FC
This value allows you to include only Fibre Channel type disks.
NL
This value allows you to include only Near Line type disks.
8.4.27.2 example:
The following examples show two ways to include disks regardless of type:
The following example specifies that only Fibre Channel disks are to be included:
8.4.28 seldiskspeed
Use the seldiskspeed option to select a disk speed.
8.4.28.1 value:
Specify one or more of the following:
--All Disk Speeds--
(Default). This value does not exclude disks based on their speed.
15
This value allows you to include only 15K RPM disks.
&seldisktype=
OR
&seldisktype=--All%20Disk%20Types--
&seldisktype=FC