HP 3PAR System Reporter Software - Manual (Page 232)

8.40 Report Options
3PAR System Reporter User’s Guide System Reporter 2.8
--All Port Types--
(Default). All port types are selected.
disk
Specify this value to include only ports connected to disks.
free
Specify this value to include only free ports.
host
Specify this value to include only ports connected to hosts.
rcip
Specify this value to include only Remote Copy over IP ports.
rcfc
Specify this value to include only Remote Copy over Fibre Channel ports.
iscsi
Specify this value to include only iscsi ports.
8.4.37.2 example:
The following example specifies that ports connected to hosts are included:
8.4.38 selraidtype
Use the selraidtype option to select logical disks with specific RAID levels.
8.4.38.1 values:
Specify one or more of the following:
0
Specify this value to include RAID 0 logical disks.
&selporttype=host