HP StorageWorks 2.64 Director Switch - Manual (Page 107)

Director Element Manager user guide 107
NOTE: Note that your director model and firmware may not allow 2 Gb/s data speeds.
8. Click the Bound WWN field and enter the WWN or nickname of the specific device to be
connected to the port.
9. Use the scroll bar on the right side of the Configure Ports dialog box table to display additional
ports that you want to configure.
10. Click Activate to activate the changes and close the dialog box.
11. If you are finished configuring the switch, back up the configuration data. For more information,
see ” Backing up and restoring configuration data ” on page 124.