HP StorageWorks 2.64 Director Switch - Manual (Page 38)

Overview 38
Right-click a port row to display the same menu options that display when you right-click a port in
the Port Card view or a port’s bar graph in the Performance view. These include:
• Port Properties
• Node Properties
• Port Technology
• Block Port
• Enable Beaconing
• Diagnostics
• Channel Wrap (FICON management style only)
• Swap Ports (FICON management style only)
• Clear Link Incident Alert(s)
• Reset Port
• Port Binding
• Clear Threshold Alert(s)
These options also display when you click a port row and select Product > Port.
For details on these menu options, see ”
Port menu ” on page 69.
For details on navigating and monitoring using the Port List view, see ” Port List view ” on page 72.
Node List view
To display the Node List view, click the Node List view tab. A table, as shown in Figure 9 on page
39, displays in the View panel. This table provides information about all node attachments or
N_Ports that have logged in to existing F_Ports on the director. Only N_Ports display in the Node
List view after nodes have logged in to the fabric.
The columns that display in the table include: port number where the node is attached, the port’s
address, WWN of the attached node’s port, unit type, and BB_Credit used by the attached node.
To display the Node Properties dialog box for a port, double-click the port row.
To display the following menu options for a port, right-click the port row:
• Node Properties—Displays the Node Properties dialog box.
• Port Properties—Displays the Port Properties dialog box.
• Define Nickname—Displays the Define Nickname dialog box, where you can define a
nickname to display for the attached device instead of the device’s eight-byte WWN.